background image

– 20 –

• WARNING: DO NOT LEAVE YOUR CHILD UNATTENDED. THE SAFETY OF YOUR CHILD IS

YOUR RESPONSIBILITY.

• Before use, ensure the dresser is on a stable, level surface.

• Do not allow children to climb on the dresser.

• Never use the dresser if any parts are broken or missing.

• Never pivot or drag the dresser on its feet, the dresser must always be lifted by at least two people

when moved.

• Do not place the dresser in the near vicinity of open fires or other sources of strong heat, such as

electric or gas fires.

• Always leave the dresser clean and dry. Wipe away any spillage straight away. The dresser can

be cleaned with a damp cloth. Never use abrasive, bleach or strong detergents.

• Check regularly that all fittings and screws are correctly tightened and are not damaged. Loose

screws can pinch parts of the body and clothing resulting in the risk of strangulation.

• A changing mattress is not supplied with this product. We recommend that you only use a 

Mamas & Papas changing mattress with the Murano Dresser/Changer. Lay the changing mattress on
the changing surface, within the retaining rails.

INSTRUCTIONS FOR SAFE USE & MAINTENANCE

ALL OUR PRODUCTS ARE MADE FROM THE FINEST QUALITY MATERIALS

AND ARE MANUFACTURED UNDER THE STRICTEST QUALITY CONTROLS

We guarantee all our products or part thereof, for a period of six months from the date of delivery to the consumer

against faulty manufacture. This guarantee is not effective against damage caused as a result

of incorrect usage of the product or accidental damage. This in no way affects your statutory rights.

Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown in
these instructions. Any spare components should be thrown away after you have 

fully

constructed your product. We reserve

the right to change the specifications of any piece of furniture without prior notice.

AFTER SALES SERVICE:

If you need assistance, spare parts or you are unhappy with any of the

goods please contact 

Customer Services

on:

0870 8307700

or e-mail us at:

[email protected]

Visit our website at 

www.mamasandpapas.com 

for the latest product information.

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Summary of Contents for murano dresser/changer





















Reviews: