20
|
When this button is activated, the back and upper leg sections
are adjusted equally, so that the patient can be brought into an
upright sitting position.
This function should only be used with mobile patients and
patients without any physical complaints.
Caution ! Please consider patient safety when
setting auto contour! No other objects should
be in the area of the lifting mechanism.
Trendelenburg-/
Anti-Trendelenburg position
The Impulse clinical bed range comes with lying surface incli-
nation as standard.
The head or foot height is set using the button on the nurse’s
operating panel.
(Trendelenburg / Anti-Trendelenburg
operating button)
Caution ! Please consider patient safety when
adjusting bed inclination! No other objects
should be in the area of the lifting mechanism.
This function must only be used by specialist
staff and must be locked by specialist staff on
the back of the hand controller. Faulty settings
can lead to serious injury to the patient.
Hand controller locking function
The electrical unit combines state of the art technology and
first fault safety.
The locking function acts as one more safety precaution. The
locking function is located on the back of the hand controller
and is used by staff with a key switch. In the event of a failure
of the electrical motor, the functions can be disabled via the
corresponding rotary switch.
Operation:
The hand controller functions can be limited by turning the key
switch in the different switch positions. The symbols are clearly
described on
of the instruction manual.
Operating the locking function is described in more detail on
p.14 (Hand controller symbols)
.
Further locking functions can be found on the nurse’s control
panel (
F
Summary of Contents for Impulse KL Series
Page 1: ...IMPULSE KL SERIES INSTRUCTIONS FOR USE CLINIC DESIGN...
Page 2: ...2...
Page 6: ...6 Room representation Impulse 300 KL Impulse 400 KL...
Page 29: ...29...
