|
13
R A T I N G P L A T E
The rating plate is located on the underside of the lying sur-
face, at the head of the bed, on the right. To inspect the rating
plate, raise the head to the upper position.
1. Model id.
2. Serial number
3. Electrical voltage, frequency, power consumption
4. Operating time of the electrical adjustment: please ob-
serve this point to prevent over heating! For example, the
bed can only be continuously operated for max. 2 min.
within 18 min.
5. Protection of electrical equipment from water spray
“only use in dry areas” Protection Rating Class II
(double insulation, protective insulation)
6. Indicates the next technical check after delivery in ac-
cordance with VDE0751-1
Typical illustration of a rating plate on an Impulse 300 KL clinical bed, standard design with mains connection
7. Explanation of the terms used on the rating plate:
Application part type B
Directive 2002/96/EC relating to old electrical
and electronic equipment
Conformity marking in accordance with Medical
Devices Directive
Protection Rating Class II (double insulation,
protective insulation)
“Only use in dry areas”
“Follow the instructions”
2
1
3
4
5
6
7
Input:
230-240 V
≈
50/60 Hz max 2A
Output:
35 V = 2 A
Operation:
max. 2min / 18min off
Protection class:
IPX6
250 kg
185 kg
Betten Malsch GmbH | Rohbergstraße 9 | D-36208 Wildeck-Obersuhl
Tel.: +49 (0)6626 / 915 100 | Fax: +49 (0)6626 / 915 116
1
2
3
4
5
6
7
8
9
10
11
12
NEX T
I N
S P E C T I O
N
2016
Clinical bed Impulse KL
S/N
0815 1234567
8
Summary of Contents for Impulse KL Series
Page 1: ...IMPULSE KL SERIES INSTRUCTIONS FOR USE CLINIC DESIGN...
Page 2: ...2...
Page 6: ...6 Room representation Impulse 300 KL Impulse 400 KL...
Page 29: ...29...
