|
19
Transfer position
(only with Impulse 400 KL)
The tranfer position allows an optimum positional mounting
and dismounting in the seat area of the bed at sitting height.
Use the corresponding button on the hand controller and hold
it until the position is reached.
(Transfer position operating button)
Low position/Fall prevention
(Only with Impulse 400 KL)
Use the corresponding button on the hand controller to adjust
the low position.
(Low position operating button)
By actuating the Button the bed moves out of the transfer posi-
tion to the low position.
Caution ! Before activating the button, you
must ensure that the lowered, splitted side rails
are retracted (
F
p.22, Fig.1
) and that there
is nothing under the bed!
Comfort sitting position
Use the corresponding button on the hand controller to set the
comfort sitting position.
(Comfort sitting position operating button)
When the button is activated the adjustment motors on the
lying surface and the lifting mechanism operate simultaneously
to bring the bed into a sitting position.
This function should only be used with mobile patients and
patients without any physical complaints.
Caution ! Please consider patient safety when
setting the comfort sitting position! No oth-
er objects should be in the area of the lifting
mechanism.
Auto contour
Use the corresponding button on the hand controller to set
auto contour.
(Auto contour operating button)
Summary of Contents for Impulse KL Series
Page 1: ...IMPULSE KL SERIES INSTRUCTIONS FOR USE CLINIC DESIGN...
Page 2: ...2...
Page 6: ...6 Room representation Impulse 300 KL Impulse 400 KL...
Page 29: ...29...
