|
23
Integrated lying surface extension
(only Impulse 300 KL / 400 KL)
The clinical beds Impulse 300 KL/400 KL have an integrated
lying surface extension, which allows the lying surface to be
extended by 10/20 cm without requiring tools.
This is activated without use of any tools by means of two le-
vers on the bottom of the foot end of the lying surface in three
simple steps:
1. Operate both levers simultaneously and while doing so
pull them towards you.
2. Pull the bed extension out fully and position the mattress
insert.
3. Now push the bed extension back in without using the
pedal until you hear it lock.
An intermediate position is possible with the 10 cm ex-
tension, which does not require an insert. Adjust the
mattress accordingly for this. Also, when using this posi-
tion, take care to ensure that the lying surface is definite-
ly locked in place.
Caution ! A mattress extension must be at-
tached if the lying surface is extended to 20 cm.
Caution ! The lying surface extension should
only be activated by authorised specialist staff.
1.
2.
3.
Summary of Contents for Impulse KL Series
Page 1: ...IMPULSE KL SERIES INSTRUCTIONS FOR USE CLINIC DESIGN...
Page 2: ...2...
Page 6: ...6 Room representation Impulse 300 KL Impulse 400 KL...
Page 29: ...29...