Front Loading Utensil Washer Disinfector (WDF)
Operation, Maintenance and Installation Manual
Issue 1
Page
11
20/01/2022
4.0
Cycle of Operation
The operation can be stopped at any time by pressing the Power button to the left of the display
In an emergency power off and isolate device at isolator/circuit breaker
1. Press the POWER button; to wake the device from Stand-by mode:
Stand-by
After a short delay display will show READY
Ready
2. Open door; and load items to be processed; display will show:
Door Open
3. When door is closed; display will show:
Ready
4. To start cycle press the start button; the door will lock, the cycle indication LED Halo around the start
button will begin to flash green and the display will show each cycle stage as the automatic cycle is
completed:
Cold Rinse
