Front Loading Utensil Washer Disinfector (WDF)
Operation, Maintenance and Installation Manual
Issue 1
Page
10
20/01/2022
3.0
Detergent replacement procedure
WARNING!
SAFETY GLOVES AND GOGGLES MUST BE WORN WHEN CHANGING
DETERGENT AND DISPOSING OF EMPTY CONTAINERS
Current Safety Data Sheet for Malmet device Detergent is available in .PDF format from Malmet’s website.
www.malmet.com.au
Only use Malmet approved detergent (See technical data for detergent details)
1.
Ensure area is clear of any potential hazards
2.
Ensure you are wearing appropriate PPE
3.
Move new bottle as close as practical to unit’s detergent storage location
Note: Leave cap on new bottle until in position
4.
Remove empty detergent container and sit beside new detergent container
5.
Remove lid from new container, then carefully remove suction cap and hose from old container an insert into the
new container and fasten cap
6.
Place lid of old container onto empty container
7.
Put new container back into position
8.
Restart device operation as normal
Disposal of empty detergent bottles
1.
When handling empty containers treat as though container is full and wear appropriate PPE as per SDS requirements
2.
Triple rinse container and puncture base to render unusable
3.
Dispose of containers as per facility chemical waste handling procedures, and/or local government requirements
