Malloca MOV-LX74, User Manual

Page: 8 / 32

7
Oven Functions
At the first power on, the display shows the
12
:00 hours flashing. At this time you can only set the oven
time and then activate the oven. To set the oven time (if it was not done at first power on), press and hold
the MENU symbol for at least 4 seconds. To turn on the oven just press the power button ON / OFF, the
display shows ON and after 2 seconds the oven light is turned on. If no action is taken in the next 5 minutes,
the oven will automatically turn off. To turn the oven off, press the ON / OFF symbol. The display shows
OFF and after two seconds the oven switches off. If the cavity temperature is higher than 50 ° C, HOT
appears when the temperature drops below 50 ° C. HOT is replaced by the time of day.
Timer
The timer do not interact with the oven functions, as it is always usable irrespective of the active function.
Press the MENU button and use the arrows to set the desired value up to 180 minutes. After 4 seconds
from the last action, the proposed value is set.
At the end of the time, a beep sounds and the bell icon is turned off.
Manual cooking
To start cooking, switch on the oven and select the function. The oven offers a default temperature that
can be adjusted. After about four seconds of the selection, the oven starts cooking.
Cooking time
Turn on the oven and press MENU three times, the display will show "dur" . Then set the desired time value
up to
720m
. After approximately four seconds the value is accepted.
Delayed cooking start
You can set the end of a cooking immediately after setting the duration. Set the desired length of time and
press the MENU symbol once, the display shows END, then set the time by pressing the symbols to increase
or decrease a value. After four seconds the set value is accepted and the oven prepares for the delayed
cooking start. The oven will turn off immediately and will turn on again at the time the cooking start was
set.
At this stage, the selected function and temperature can be displayed (can be changed at a later time)
End of cooking
When a cooking is finished, a beep is heard, the icon of the selected function and the temperature switch
off and the display shows the time of day as the symbols flash. Press any symbol to return to manual
cooking mode.
After 7 minutes without any action, the beep is interrupted and the display goes into standby mode.
Select a function
The clock display shows the selected cooking function, the program or Pr01 if no programs have been
selected.
The cooking mode displays the cavity edges flash to indicate that a program has been selected.
Child safety
To activate the child safety function, press the ON / OFF button for 3 seconds.
The display shows "n-00" followed by ON. When you activate cooking functions and temperatures can not
be changed. To turn off the function, press the power button for 3 seconds.
Light oven
The oven light is on when a function is active when the oven reaches the set temperature and when the
oven door is opened.