Malloca MOV-LX74, User Manual

Page: 13 / 32

12
REMOVAL/ ASSEMBLY OF THE LATERAL GUIDES
Before proceeding, make sure that the oven is cool
Tightly grip the guide at the front, lift it until it blocks and pull the front part towards the inside of the oven
(fig.1) in a way that it can release itself from its front seat. Now, pulling towards yourself, the guide will
slide for approx. 1 centimetre. Lift it and release it from its seat by pulling it inside the oven cavity. (fig.2).
Fig. 1 Fig. 2
Fig.1 (FI-95) Fig.2 (FI-95) Fig.3(FI-95) Fig.4(FI-95
)
To re-mount the guides, perform the steps in reverse order ( Fig.1-Fig.2-Fig.3-Fig.4)
REMOVING/MOUNTING THE SLIDING GUIDES (IF ANY)
If supplied, you will find running guides installed. To remove them, release the lateral support guides as
described in the "REMOVAL AND MOUNTING THE LATERAL GUIDES" paragraph.
Holding the lateral guides vertically on a flat surface, release the lower part of the runner, making it turn as
indicated in figure 1. At this point, the runner can be removed completely from its housing.
Fig.1 Fig.2