Mallincam HD-10 II User Manual
March 30, 2020
HD-10 II User Manual
Page 46
Feature
Title
Usage
Auto Stop
This control allows the software to automatically
stop recording without you pressing a key.
You have two options, stop after a specific number
of video frames has been recorded, or stop after a
specific time has elapsed.
Total Frame
With this button selected, you can enter a value of
the number of frames that you will allow to be
recorded.
You have a range from 1 to 9999 frames to use.
Total Time
With this button selected, you can enter a value of
the number of seconds that you will allow to be
recorded.
You have a range from 1 s to 9999 s to use.
Default
This control resets these module controls back to
the factory defaults which is
No Auto Stop
,
No
Delay
and
No compression
.
Delay Capture Tab
It is here in the
Delay Capture Tab
where you can delay the capture
of both the snapshot and the video recording of what the Mallincam
HD-10 II is imaging. You can use this tab to have the software
automatically capture up to 9999 snapshots. You can also use this
tab record a video of the still snapshots.
Feature
Title
Usage
Total Frame
With this button selected, you can enter a value of
the number of snapshots that you will allow to be
taken. Snapshots will be taken one after another
unless you enter an
Interval Time
in which case the
Interval Time
will be the pause between each
snapshot.
The images will be saved via the information set in
the
File Save
Tab.