Maldol DB-25-M, User Manual

Page: 20 / 32

MALDOL DB-25-M 16
ID code, this function is not controlled by RX signaling. (Remote kill code is programmable by PC
software.)
Remote Revive
When receiving matched DTMF signaling which is same as pre-programmed remote revive code, the
radio will be revived and restore to work normally. This function is able to select to be or not to be
controlled by master ID code, this function is not controlled by RX signaling.(Ftemote revive code is
programmable by PC software.)
Emergency Alarm
When receiving matched DTMF signaling which is same as pre-programmed emergency alarm code,
the radio will emit alarm‘ Emergency alarm mode and channel is PC programmable. This function is
able to select to be or not to be controlled. This function is not controlled by master ID code and FIX
signaling. (Emergency alarm code is programmable by PC software.)
Signaling controlled by master ID; Function will be implemented only when both signaling and
master ID matched.
Signaling no controlled by master ID format: sig # + information code.
Signaling controlled by master ID format:
sig tt + master code + If + information code.
Transmit DTMF Signaling by [CALL]
1. Select DTMF signaling, press [F] + [2] + [0] + [F] + [UP]/[DOWN] to select DTMF sig [F] tto
save settings.