Maldol DB-25-M, User Manual

Page: 16 / 32

MALDOL DB-25-M 12
[F] + [4] + [3]: REP-M: Repeater transpond setup.OFF: The function is disabled. CARRl: Repeater
transpond by receiving matched carrier. CTDCS: Repeater transpon by receiving matched CTCSS/
DCS. TONE: Repeater transpon by receiving matched tone. DTMF: Repeater transpond by
receiving matched DTMF code. Press [F] to save the setting.
45.[F] + [4] + [4]: TDR-AB: Dual standby function(TDFt) setup‘ OFF: The function is disabled, radio
always stay on the main band. ON: Radio will automatically switch to the channel which receiving
matched signals. Press [F] to save the setting.
46.[F] + [4] + [5]: SET: Squelch tai|—e|imination. ON: Enable squelch tail-eliminated function.
OFF: Disable squelch tail-eliminated function. lf radio work with a repeater, please turn off this
tunction. Press [F] to save the setting.
47.[F] + [4] + [6]: RP-STE: Repeater squelch tall-elimination setup. OFF: This function is disabled.
1-10 indicate squelch tail length, used to eliminated squelch tail noise produced because of
repeater delay. Press [F] to save the setting.
48.[F] + [4] + [7]: RPT-DL: Delay time to receive repeater signal setup. OFF: Disabled this function.
1-10: Select delay time to receive repeater signal. Press [F] to save the setting.
49.[F] + [4] + [B]: RESER: Reset setup. VFO: Reset the menu mode to factory default setting. ALL:
Reset all memories and other settings to factory default setting. Press [EXIT/AB] to exit after
setting.