background image

1. SAFETY

1.1 Symbol Key

This symbol expresses the risk of serious personel injury or death unless taking care of 

warnings.

This symbol expresses the risks which can cause minor injuries or harms to 

the environmet and goods.

1.2 Safety Precautions

Do not open the protective cover of the device.

Electric shock as a result of the contact with electrical items.

Personel injury like burnt as a result of contact with overheated surfaces or cut as a result 

of contact with sharp surfaces.

Do not remove the device from the place of mounting, do not disconnect the 

electrical or water connections. (Get in contact with authorized service)

Electric shock as a result of the contact with electrical items.

Flood as a result of demounted water installation.

Protect the main energy cable against damages.

Electric shock danger as a result of contact with not izolated open wires.

Do not leave tools or other objects on the device.

Injury resulted from falling objects from device because of vibration.

Damage to the furniture or floor or animals resulted from falling objects from device 

because of vibration.

Do not climb on the device.

Personel injury as a result of falling down with device or falling down of the device itself.

Damage risk under device as a result of fall down from the place installed.

Do not climb on unsteady objects like stool, chair or ladders for cleaning or 

maintenance.

Personel injury resulted from falling down from height or cuts which can be caused from a 

rapid closing of the ladder.

Do not clean the device without switching it to off position and cutting of the main 

energy supply.

Electric shock as a result of the contact with electircal items.

Use the device for only heating the house and getting hot water.

Explosion and damage risk resulted from inappropriate using and overloading.

Damage risk to the environment resulted from inappropriate using.

Do not allow children or adults who have limited physical or mental competance, or 

People lacking the knowlagde about the operating instructions of the boiler to 

intervene with the device.

Risk of damage to device resulted from misuse.

Personal injury from burnts, breathing smoke or poisoning.

&

&

&

&

&

&

&

 

&

 

&

 

3

Summary of Contents for Omega 6




















Reviews: