Maktek MR20, Installation, Usage And Maintenance Manual

Page: 10 / 27

Stage 4: Installation of Heat Reflector
Fistly pass the reflectors in hanger profiles and extend on pipes as shown in picture. Leave 100mm distance between reflector end and pipe's burner
fix end.
There are 5 each screw holes on 3mm diameter one end and 4mm diameter other end of the reflectors.
For making radiant connections healthly, superimpose 4mm diameter perforated end on 3mm diameter perforated end of the reflector and align the
hole centers, make screwing on all holes and lastly srew the reflector holder part as shown in picture.
8