12. CARRYING AND TRANSPORT
A) PLACING THE BOILER ON VEHICLE
*
When the boiler places on vehicle, loading should be with crane.
*
Gates of the wehicle should be opened previously.
*
Make use of the supporting ring while loading boiler with crane.
*
Pass the crane buum hook from the supporting ring.
*
Make sure that hook pim is in safety.
*
Uphold the crane buum and take the space.
*
Slowly uphold the boiler that bottom level should be 30-40cm up from the ground.
*
Keep away from sudden moves that would cause boiler to shake.
*
Move the boiler next to vehicle in this way.
*
Lift the boiler from 30-40cm higher than the vehicle body and and take it down on
vehicle body correctly.
*
Remove the hook from crane supporting ring.
Attention
: Boiler must be carried in vertical position, make use of the supporting ring.
When the boiler lifted up with crane, there shouldn't any living being under the boiler.
Boiler must
be carried with its accessories installed on it.
B) CARRYING BOILER ON VEHICLE
When the boiler is carrying with vehicle, it should be tied to vehicle strictly, supporting
stuff which would prevent slipping, should be put around. Boiler should not carry with
fragile, smashable and living beings. Top of the vehicle should be covered with canvas
after placing boiler. Driver should keep away from the sudden moves that would cause
danger.
C) UNLOADING THE BOILER TO THE PLACE OF USE
Boiler should not be placed in work or residence places, should be placed in a seperate
boiler room.
When unloading the boiler to boiler room, crane must be used again, points that stated in
Clause A, should be considered.
If the place of use is not appropriate for crane entrance, boiler should be unload in a
proper place and carry with rollers to the place intended.
