15
ATTENTION !!!
Fuel loading and feeding values are in Table 1. Loading and feeding settings
belongs to the fuel only which one used in. It is necessary to do new settings when the fuel type
is changed
SAFETY TERMOSTAT
Safety termostat is placed behind the control panel and steps in
breakdown of boiler water setting termostat and prevents the increase of boiler water
temperature. Ensures secondary safety and protects the boiler. Recommended to be set at
80 °C.
IMPORTANT!!!
When any adjustment is not being made on digital display, it shows the boiler water temperature
at that time.
7. FIRST OPERATION AND USE
7.1 First Burning
In first burning, system water must be full and system air must be vented.
Fuel loading must be done over the grate. Grate prevents entrance of foreign materials, big
sized coal pieces inside the bunker and prevents damage to the reducer and loading spiral.
Also passes the proper size of coal which will burn easily and efficiently into the bunker.
Small wood pieces must be ignited with gas and paper for burning the fuel in boiler. Then boiler
gates must be closed and fan must be runned in low speed till full ignition of coal. If fan blows
too much air, slagging of the fuel occurs because of the cooling affect of the combustion
chamber.
Make the fuel feeding and waiting settings according to boiler and fuel type from the
Table 1:
When the ignition is complete, make the reductor button on and make the boiler run with
settings you desire.
Increase the fan speed after ignition and provide the fuel efficiently.
It would be good to set the boiler water temperature at a high degree (70°C) from control panel.
Afterwards this temperature can be set to desired degree.
