3
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
ENE039-1
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS HAMMER DRILL
SAFETY WARNINGS
GEB056-3
1.
Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
2.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring.
Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
4.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
5.
Hold the tool firmly.
6.
Keep hands away from rotating parts.
7.
Do not leave the tool running. Operate the tool
only when hand-held.
8.
Do not touch the bit or the workpiece immediately
after operation; they may be extremely hot and
could burn your skin.
9.
Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
1.
Red indicator
2.
Button
3.
Battery cartridge
4.
Switch trigger
5.
Reversing switch lever
6.
Speed change lever
7.
Adjusting ring
8.
Action mode changing ring
9.
Graduation
10. Arrow
11. Chuck
12. Sleeve
13. Tighten
14. Blow-out bulb
Model
MT080
MT081
Capacities
Concrete
10 mm
13 mm
Steel
10 mm
13 mm
Wood
25 mm
36 mm
Wood screw
5.1 mm x 63 mm
6 mm x 75 mm
Machine screw
6 mm
No load speed (min
-1
)
High (2)
0 - 1,400
Low (1)
0 - 400
Blows per minute (min
-1
)
High (2)
0 - 21,000
Low (1)
0 - 6,000
Overall length
216 mm
238 mm
Net weight
1.5 kg
1.7 kg
Rated voltage
D.C. 14.4 V
D.C. 18 V
