22
6.7 Grinding Quality
The smoothness of any surface depends on a series of variables. Factors such as the type of material
being sanded, type of sandpaper and pressure on the sandpaper contribute to the quality of sanding.
Make sure that the material does not vibrate during process.
6.8 Support for Long Pieces
ALWAYS SUPPORT LONG PARTS.
Support long pieces using any shape convenient with easels or similar structures to prevent the
ends from falling out.
CONSULT THE MAKSIWA CATALOG AND FIND PRODUCTS FOR THIS FUNCTION.
7 Technical Assistance
For your greater safety, maintenance and adjustments (including inspection and replacement)
contact technical assistance recommended by MAKSIWA, which will always use genuine spare parts
and accessories, reassembling your sander in the same way as the original.
Before using an extension cord, check for loose or exposed wires, damaged insulation and defective
fittings. Repair or replace the extension if necessary.
8 Terms of Warranty
MAKSIWA assures the owner that their equipment, identified by the Serial number issued on the
Warranty Terms.
The equipment under warranty, for two (2) years, is as followed:
1. The warranty period begins on the date of the Warranty Terms below.
2. Within the warranty period, the manual labor and the components replaced by manufacturing
defect will be provided for free if duly proved by Maksiwa Service.
3. Third-party manufacturing equipment that makes up the MAKSIWA equipment (such as motors,
electrical equipment, belts etc.) are subject to the terms and conditions of warranty of their
respective manufacturers.
4. In case an exchange of machine is needed, please return the defective part or machine to
