14
4 Settings
This machine can perform many types of operations that are outside the scope of this manual. Many
of these operations can be dangerous or lethal if done incorrectly. The instructions in this section are
written with the understanding that the operator has the knowledge and skills necessary to operate
this machine. If at any time you experience difficulties performing any operation, stop using the
machine. If you are an inexperienced operator, we recommend that you read books, trade articles,
or seek the training of an experienced operator, before carrying out any unknown operations. Above
all, your safety must come first.
4.1 Table Angle Adjustment
The side table can be tilted between 0º and 45º through the following steps: Release the handle (A)
that he finds it below the table, without removing it completely. Position the table at the desired
angle checking the position on the scale (B). Tighten the handle again, locking the table. To make
sure that the angle is correct, check with the aid of a feedback. If necessary, adjust the square
pointer on the scale.
4.2 Sandpaper Angle Adjustment
The Tape sandpaper can be positioned vertically or in the horizontal or between any angle between
0º and 90º depending on your needs. To adjust, follow these steps: Loosen the hex nut (A). Adjust
