20 ENGLISH
3.
Open the tank cap, and then set the strainer.
►
Fig.28:
1.
Tank cap
2.
Strainer
4.
Pour the liquid into the tank, and then tighten the
tank cap.
►
Fig.29
5.
Put on the machine, then lock the buckle of the
waist belt.
6.
Turn the nozzle lever so that the nozzle lever is in
the open position.
►
Fig.30:
1.
Nozzle lever
7.
Turn on the machine, and then hold the control
handle firmly and perform the mist blowing operation.
After the operation, turn the nozzle lever so that the
nozzle lever is in the closed position.
When setting down the machine, unlock the buckle of
the waist belt, and then set down the machine slowly.
►
Fig.31:
1.
Buckle
NOTE:
You can stir the liquid in the tank by turning
the strainer as shown in the figure.
►
Fig.32:
1.
Strainer
MAINTENANCE
CAUTION:
Always be sure that all the battery
cartridges are removed from the machine before
storing or carrying the machine or attempting to
perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Draining the liquid
When draining the liquid in the tank, remove the hose
from the main unit, and then drain the liquid in the tank
into the container by opening the draining lever. After
draining the liquid, be sure to close the draining lever,
and attach the hose to the main unit.
►
Fig.33:
1.
Draining lever
2.
Hose
NOTE:
To empty the tank completely, tilt the main unit
slightly toward the outlet of hose.
Cleaning the machine
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Clean the machine by wiping off dust with a dry cloth or
one dipped in soapy water and wrung out.
Remove dust or dirt from the suction inlet.
►
Fig.34:
1.
Suction inlet
Cleaning the filter
Clean the filter regularly. To clean the filter, follow the
steps below.
1.
Remove the battery cartridges, and then close the
tank lever.
2.
Remove the filter cap by turning it counterclock
-
wise, and then remove the filter.
►
Fig.35:
1.
Filter cap
2.
Filter
3.
Clean the filter with running water.
4.
Attach the filter to the main unit, and then tighten
the filter cap.
5.
Open the tank lever.
Storage
Before storing the machine, perform full maintenance.
Store the machine in a place out of the reach of children
and not exposed to moisture, rain, or direct sunlight.
You can connect the band of the pipe to the machine as
shown in the figure to stand up the pipe.
►
Fig.36:
1.
Band
Changing the nozzle
You can change the standard nozzle to the ULV (Ultra
Low Volume) nozzle. The ULV nozzle can discharge
finer mist than the standard nozzle. To change the
nozzle, follow the steps below.
1.
Loosen the screw and remove it, and then remove
the front side of the end nozzle.
►
Fig.37:
1.
Screw
2.
End nozzle
2.
Remove the standard nozzle by turning the nozzle
counterclockwise using the wrench.
►
Fig.38:
1.
Wrench
2.
Standard nozzle
3.
Remove the O-ring from the standard nozzle, and
then attach it to the ULV nozzle.
►
Fig.39:
1.
O-ring
2.
Standard nozzle
3.
ULV nozzle
4.
Attach the ULV nozzle by turning the nozzle clock
-
wise using the wrench.
►
Fig.40:
1.
Wrench
2.
ULV nozzle
NOTICE:
Do not tighten the nozzle too much.
The recommended tightening torque is approxi-
mately 1.0 N•m.
Tightening the nozzle too much may
damage the mounting part for nozzle.
5.
Attach the end nozzle, and then tighten the screw.
►
Fig.41:
1.
Screw
2.
End nozzle
Summary of Contents for XGT 40 V Max
