Makita PC01, Instruction Manual

Page: 6 / 16

6 ENGLISH
1
2
► 1. Screw 2. Lock pin
2. Remove the lock pin, and then remove the screw
and the blade.
3. Attach the new blade with its flat surface facing the
tool, then insert the lock pin, and then tighten the screw
firmly to secure the blade.
1
2
3
► 1. Blade 2. Screw 3. Lock pin
4. Remove the lock pin.
OPERATION
CAUTION:
When operating the tool, do not
touch the blade or bring the tool near the hand
or face.
CAUTION:
When cutting the material, never
put the hand in front of the blade.
NOTICE:
Before operating the tool, make sure
that the blades are in the right position as shown
in the figure.
Hold the tool firmly. Turn on the tool, then set the blade
against the material to be cut, and then move the tool
forward.
NOTICE:
Do not apply excessive force to the
tool. It does not help to cut the material smoothly.
NOTE: When cutting the thin material such as fabric,
apply sufficient tension to the material while holding it
and move the tool slowly.
When cutting a disc (CD, DVD, or Blu-ray Disc), tilt it as
shown in the figure to cut it smoothly.