![background image](http://html1.mh-extra.com/html/makita/m9800kx4/m9800kx4_instruction-manual_4720848004.webp)
4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
M9800
Oscillation per minute
15,000 - 22,000 min
-1
Oscillation angle, left/right
1.6 ° (3.2 ° total)
Overall length
283 mm
Net weight
1.2 - 1.3 kg
Safety class
/II
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.
Intended use
The tool is intended for sawing and cutting wood,
plastic, gypsum, non-ferrous metals, and fastening
elements (e. g. unhardened nails and staples). It is also
intended for working soft wall tiles, as well as dry sand-
ing and scraping of small surfaces. It is especially for
working close to edge and flush cutting.
Power supply
The tool should be connected only to a power supply of the same
voltage as indicated on the nameplate, and can only be operated
on single-phase AC supply. They are double-insulated and can,
therefore, also be used from sockets without earth wire.
Noise
Work
mode
Sound
pressure
level
(L
pA
) :
Sound
power
level
(L
WA
) :
Uncer-
tainty (K)
Appli-
cable
standard
Sanding
81 dB(A)
89 dB (A)
3 dB(A)
EN62841-2-4
Cutting
with
plunge cut
saw blade
82 dB(A)
90 dB (A)
3 dB(A)
EN62841-1
Cutting
with
segmental
saw blade
82 dB(A)
90 dB(A)
3 dB(A)
EN62841-1
Scraping
81 dB(A)
89 dB (A)
3 dB(A)
EN62841-1
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea
-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The following table shows the vibration total value (tri-axial vector sum) determined according to applicable standard.
Work mode
Vibration emission
Uncertainty (K)
Applicable standard
Sanding (a
h
)
2.5 m/s
2
1.5 m/s
2
EN62841-2-4
Cutting with plunge cut saw blade (a
h
)
8.0 m/s
2
1.5 m/s
2
EN62841-1
Cutting with segmental saw blade (a
h
)
4.0 m/s
2
1.5 m/s
2
EN62841-1
Scraping (a
h
)
9.5 m/s
2
1.5 m/s
2
EN62841-1
Summary of Contents for M9800KX4
