4-3
Pad 123, Ball bearing 6202DDW and Armature Ass’y (cont.)
4-4
Disassembling
4-5
Assembling
Fig. 4-3-1-1
[5] Remove Bracket with arbor press.
[6] Remove Ball bearings from Armature ass’y using 1R269 and Water pump pliers.
Note:
here is little space between Ball bearing 606ZZ and Insulation washer / Ball bearing 629DDW and Washer 9.
Therefore, hold the jaws of 1R269 with water pump pliers to retain Ball bearing securely.
Temporarily tighten M4x14 Pan head screw to Armature shaft to protect the female thread when removing Ball bearing
629DDW.
Bracket
Arbor press
Armature ass’y
Water pump pliers
1R269
Insulation washer
Ball bearing 606ZZ
Ball bearing 629DDW
Washer 9
M4x14 Pan head screw
Water pump pliers
1R269
Fig. 4-3-2-1
Assemble by reversing Disassembling procedure
.
Note:
When fixing Washer 9 to Armature shaft, face the convex portion to outside as drawn in below
.
Fit Brake ring into Skirt set as drawn in below
.
Convex portion
of Washer 9
Protrusions on
the rim portion
of Brake ring
Rim portion of Brake ring
Groove on Skirt set
(1) Face the rim portion to the machine side.
(2) Fit the protrusions on the rim portion of
brake ring into the notches of Skirt set.
(3) Insert the rim portion of Brake ring into
the groove on Skirt set.
Notches of Skirt set
5
/
6
