4
17.
Do not touch the workpiece immediately after
operation; it is extremely hot and could burn
your skin.
18.
Store wheels in a dry location only.
SAVE THESE INSTRUCTIONS.
INSTALLATION
Securing cut-off
1
2
003980
This tool should be bolted with two bolts to a level and
stable surface using the bolt holes provided in the tool's
base. This will help prevent tipping and possible
personal injury.
FUNCTIONAL DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on
the tool.
Switch action
1
2
003981
CAUTION:
•
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
For tool with lock button
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
For tool with lock-off button
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided.
To start the tool, depress the lock-off button and pull the
switch trigger. Release the switch trigger to stop.
CAUTION:
•
When not using the tool, remove the lock-off button
and store it in a secure place. This prevents
unauthorized operation.
Stopper plate ( except for European
countries )
(A)
(B)
1
1
003982
The stopper plate prevents the cut-off wheel from
contacting the workbench or floor. When a new wheel is
installed, set the stopper plate to position (A). When the
wheel wears down to the extent that the lower portion of
the workpiece is left uncut, set the stopper plate to
position (B) to allow increased cutting capacity with a
worn down wheel.
Interval between vise and guide plate
1
2
3
4
003983
003759
1. Socket wrench
2. Guide plate
3. Move
4. Hex bolts
1. Stopper plate
1. Lock button /
Lock-off button
2. Switch trigger
1. Base
2. Bolt holes
