P 5/ 13
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Spiral Bevel Gear 37, Ball Bearing 6201DDW
DISASSEMBLING
Fig. 7
1R026
1R281
1R217
approx.
10 mm
(2) Disassemble Spindle as illustrated in
Fig. 7
.
(3) Disassemble Ball bearing 6201DDW from Gear housing complete. (
Fig. 8
)
Bearing box
Spindle
Spiral bevel
gear 37
4. Push Spindle out a little by striking 1R026
carefully using arbor press with a down stroke
of approx.10mm long. Then remove 1R026.
3. Put Bearing box on 1R217,
then put 1R026 over the
stepped portion of Spindle.
Spindle
Fig. 8
1R005
6. Remove Retaining ring R-32 with 1R005.
7. Remove Ball bearing 6201DDW from
Bearing box.
In this step, Flat washer 12 is removed.
Ball bearing
6201DDW
Flat washer 12
Retaining
ring R-32
5. Put 1R281 on Spindle.
Then, using arbor press,
press 1R281 to remove
Spindle from Spiral bevel
gear 37.
Note:
Do not reuse removed Ball bearing 6201DDW
because it is damaged in this step.
