P 3/ 13
R
epair
[3] DISASSEMBLY/ASSEMBLY
[[3]-1. Armature, Spiral Bevel Gear 13, Ball Bearing 629ZZ, Ball Bearing 607ZZ
DISASSEMBLING
ASSEMBLING
M6 Hex nut
Ball bearing
629ZZ
Ball bearing
607ZZ
Flat washer 9
Wrench 10
Spiral bevel gear 13
4. Disassemble Armature from
Gear housing complete.
5. Disassemble Spiral bevel gear 13 from Armature by removing
M6 Hex nut with Wrench 10.
(2) Remove Spiral bevel gear 13, Ball bearings from Armature. (
Fig. 3
)
Do the reverse of the disassembling steps.
Note in Assembling:
When Motor housing and Gear housing complete are joined together,
Spindle must be positioned on the opposite side of Switch knob.
(Fig. 4
)
6. Using 1R269, remove Ball bearing 629ZZ and Flat washer 9 from the Fan side, then Ball bearing 607ZZ
from Commutator end.
Armature
Fig. 3
Fig. 4
Gear housing
complete
Motor housing
Spindle
Switch knob
M6 Hex nut
Ball bearing
607ZZ
Ball bearing
629ZZ
[Wrong]
[Correct]
Switch knob
Spindle
