W
iring diagram
P 12/ 13
Fig. D-5
Wiring on Motor Housing
Switch
rib (b)
rib (c)
rib (d)
rib (a)
Switch lever
Noise
suppressor
Terminal
block
Terminal
block
Left Side View
Bottom View
rib (a)
rib (b)
Switch
rib (b)
rib (c)
rib (d)
rib (a)
Switch lever
Noise
suppressor
Closed end
splice
Closed end
splice
rib (a)
rib (b)
Fix Field lead wire (red)
in these two grooves.
Fix Field lead wire (red)
in these two grooves.
Be sure to route all of the Lead wires inside of the ribs a) to d) as drawn below
to prevent the wires from being pinched between Motor housing and Rear cover.
Put Terminal block/ Closed-end splice in place as drawn below.
When Terminal block is used
When Closed end splice is used
