P 7/ 13
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-4. Switch Lever
DISASSEMBLING
ASSEMBLING
Fig. 10
Fig. 11
1. Slide Switch knob to OFF position,
then insert 1R281 between Switch knob
and Motor housing to lock Switch knob
in the position.
2. Push Switch lever back towards ON position
to disconnect Switch knob from Switch lever.
3. Switch knob can now be removed.
4. Pull out Switch lever from Motor housing
while bending it to release the link from
the toggle of Switch.
(1) Remove Rear cover. (
Fig. 2
)
(2) Switch lever can now be disassembled as described in
Fig. 10.
toggle of Switch
Switch knob
Switch lever
Switch Knob and Switch lever can be mounted in place as described in
Fig. 11
.
Switch knob
1R281
Motor housing
Switch knob
Switch lever
1. Insert Switch lever into Motor housing
until the square loop of Switch lever’s
front end is seen through the Switch knob
hole of Motor housing, and keep the loop
in the position.
2. Engage the hook of Switch Knob through Motor housing
in the square loop of Switch lever’s front end.
Hook of
Switch knob
Square loop of
Switch lever’s front end
