5
28.
Connect miter saws to a dust collecting device
when sawing.
29.
Select saw blades in relation to the material to
be cut.
30.
Take care when slotting.
31.
Replace the kerf board when worn.
32.
Do not use saw blades manufactured from high
speed steel.
33.
Some dust created from operation contains
chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of
these chemicals are:
•
lead from lead-based-painted material and,
•
arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies, depend-
ing on how often you do this type of work. To
reduce your exposure to these chemicals: work
in a well ventilated area and work with approved
safety equipment, such as those dust masks
that are specially designed to filter out micro-
scopic particles.
34.
To reduce the emitted noise, always be sure that
the blade is sharp and clean.
35.
The operator is adequately trained in the use,
adjustment and operation of the machine.
36.
Use correctly sharpened saw blades. Observe
the maximum speed marked on the saw blade.
37.
Refrain from removing any cut-offs or other
parts of the workpiece from the cutting area
whilst the machine is running and the saw head
is not in the rest position.
SAVE THESE INSTRUCTIONS
Summary of Contents for LS0716FL
Page 31: ...Memo 31 ...
Page 32: ...Makita Corporation 884651 DMY ...
