P
2
/
16
R
epair
Apply
the following grease/ lubricant to the specific portions to protect parts and product
from unusual abrasion.
[1] NECESSARY REPAIRING TOOLS
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
[2] LUBRICATION
Fig. 1
Code No.
Description
Use for
1R003
Retaining ring S pliers ST-2N
Removing/mounting Retaining ring S-42, holding Safety cover
1R032
Bearing setting plate 8.2
Removing Spindle from Helical gear
1R207
45-degree set square
Adjusting accuracy of 45 degrees
1R208
90-degree set square
Adjusting accuracy of 90 degrees
1R217
Ring 22
Supporting Helical gear when removing Spindle
1R228
1/4” Hex shank bit for M4
Disassembling/assembling Rear angular guide
1R269
Bearing extractor
Removing Ball bearing 607ZZ from Spindle
1R280
Round bar for arbor 6-50
Removing Spindle from Helical gear
1R340
Bearing retainer wrench
Removing/mounting Bearing retainer 23-36
Item No.
Description
Grease
Amount
Portion to lubricate
75
Makita Grease SG No.0
VG100
39
48
Angular guide
Contact surface where (39) Blade case pivots
Blade case
Gear room
approx. 6 g
a little
a little
Bearing box
Drum portion where Safety cover pivots
75
Safety cover
39
48
