P 2 / 16
Features and benefits
No electric shock to operator, even if bit accidentally hits against laid electric cables.
Barrel is also covered with resin, and so, it is possible to do chipping operations while
holding barrel with your hand.
Body Wholly Covered
with Resin
The Outstanding Chipping Power in This Class
See next page for the excellent results of various chipping/drilling tests.
Zig-Zag Varnish on Armature Coil
Protects Armature against dust, and disperses heat effectively.
Accepts SDS-Max Shank Bits
Bit can be Installed or Removed by Simply Sliding Chuck Cover.
No Hammering While Idling
Air in the cylinder is not compressed unless tool is pressed against ground.
This function ensures machine's long life.
Bar Handle Plus D-Shape Handle As Standard Accessories
Large Change Lever
Easy to change action mode to "hammering only" or "Rotation with hammering".
Fingers are free from fatigue even in along continuous operation.
Easy-to-Operate Large Trigger
Can be gripped with both hands. - convenient for downward chipping operations.
Large Rear Handle
Optimum hammering speed can be selected for a wide range of applications. Setting to low speed, ideal for such
a light chipping works as scraping tiles, removing bricks joint.
Electronic Speed Control Dial
Torque Limiter Actuated by Ball-Clutch
Assures steady torque control even after a long time operation.
Chisel can be Locked at 12 Positions Through 360 .
By turning change ring while pushing it forward, the chisel angle can be adjusted without taking out the inserted chisel.
Further Improvement in Dust Proof Structure
2
1
3
4
6
7
Accessible to Switch or Power Supply Cord Just by Removing Two Screws of Handle Cover
8
Service Reminder Lamps
Light up in green when the machine is switched on, and if any trouble, tell you its cause;
Light up, but the machine does not start.
Cause : wear of carbon brushes or trouble(s) in electric circuit or motor
Does not light up, and the machine does not start.
Cause : disconnection in mains switch or power supply cord
Light up in red nearly 8 hours before carbon brushes need servicing.
9
Large and Tough Cord Guard
Also excellent in flexibility to protect cable from disconnection
10
11
Protect commutator and tell the time for replacement.
Auto Shut-off Carbon Brushes
12
13
14
15
5
1
2
4
3
5
6
7
8
9
10
11
12
14
15
13
