![background image](http://html2.mh-extra.com/html/makita/hp331d/hp331d_repair-manual_4295168018.webp)
October 2015
4. WIRING DIAGRAM
Figure 26
Assemble receptacles to Motor as drawn.
Motor connector portion
LED
Put LED lead wire between Boss and
Rib D, Rib B and Rib C.
Red mark
Connector
Do not put Receptacle
(with Black lead wire)
over Rib A.
Receptacle
(
with Black lead wire
)
Bend motor terminal as
drawn.
Rib A
DC Motor
Line filter A (if used)
Terminal
Be careful not to put Lead wires on Rib E.
Rib E
Line filter B (if used)
Do not put Lead wires between these
Receptacles and Housing L.
Receptacle
Housing set
Switch
Side view of Switch
Pass Lead wire (Red)
between this receptacle
and Housing L; under
the receptacle.
Put Line filter A (if used) in this space.
Rib B
Switch
Put LED lead wire in this Lead
holder.
Rib C
Boss
Do not pass Lead wire under Gear case.
Rib D
Gear ass’y
Non-insulated terminals protected by
Polyolefin tube (when repairing LED circuit)
Put Non-insulated terminals protected by
Polyolefin tube (when repairing LED circuit)
inside the dotted line.
18 / 18