October 2015
2.2.2.2.
ASSEMBLING
1. Set the Speed change lever ass’y of Gear ass’y (11) to High
speed mode.
2. Remove Motor bracket by turning Gear ass'y (11)
counterclockwise when you replace it.
Figure 14
Figure 15
3. Fix with two M3x6 Pan head screws (13) while facing Motor bracket's protrusion side to the Red mark side of +
terminal when replacing motors (12).
4. Set the Speed change lever of Gear ass’y (11) to High
speed mode.
5. Aligning the Speed change lever of Gear ass'y (11) with
Red mark (plus terminal) of DC motor (12), turn DC motor
(12) clockwise to assemble it.
Note:
If Gear ass'y (11) and DC Motor (12) cannot be assembled,
assemble them by turning Fan by hand.
Figure 16
Motor bracket
Red mark
(13)
(12)
(11)
(12)
Red mark
(plus
terminal)
Fan
Motor
bracket
(11)
12 / 18