P 6 / 8
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Armature
R
epair
DISASSEMBLY
ASSEMBLY
1) Separate Handle cover from Motor housing by unscrewing three binds 4x20 Tapping screws. And disconnect Carbon
brush from Armature's Commutator. (Fig. 19)
2) Remove Gear housing and Cam housing from Motor housing by unscrewing three 4x25 tapping screws. Armature comes
out together with Cam housing as illustrated in Fig. 20.
3) Remove Armature from Cam housing. (Fig. 21)
Do the reverse of Disassembling steps.
Fig. 20
Fig. 19
Fig. 21
Cam housing
Armature
Remove Armature from Cam housing
with 1R045 to which 1R346 is attached.
1R346
1R045
1R269
bind 4x20 Tapping
screw: 3 pcs.
Handle cover
Carbon brush
Carbon brush
4x25 Tapping screw: 3 pcs.
Gear housing
Cam housing
Motor housing
Armature
Ring 8
Ball bearing
608DDW
Note: Ring 8 will always be damaged when Ball bearing 608DDW
is removed.
Be sure to replace damaged Ring 8 with new one when reassembling.
