Makita HP001G, Instruction Manual

Page: 4 / 96

4 ENGLISH
ENGLISH ( Original instructions)
SPECIFICATIONS
Model: HP001G
Drilling capacities Masonry 2 0 mm
S teel 2 0 mm
Wood Auger b it: 5 0 mm
S elf- feed b it: 7 6 mm
H ole saw : 1 5 2 mm
Fastening capacities Wood screw 1 0 mm x 9 0 mm
Machine screw M6
No load speed (RPM) H igh (2 ) 0 - 2 ,6 0 0 min
- 1
Low (1 ) 0 - 6 5 0 min - 1
Blow s per minute H igh (2 ) 0 - 3 9 ,0 0 0 min
- 1
Low (1 ) 0 - 9 ,7 5 0 min
- 1
Ov erall length 1 8 2 mm
Rated v oltage D.C . 3 6 V - 4 0 V max
Net w eight 2 .7 - 3 .0 kg
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
Specifications may differ from country to country.
• T he w eight may differ depending on the attachment(s), including the b attery cartridge. T he lightest and heav i-
est comb ination, according to E PT A- Procedure 0 1 / 2 0 1 4 , are show n in the tab le.
Applicable battery cartridge and charger
Battery cartridge BL4 0 2 5 / BL4 0 4 0
C harger DC 4 0 RA
• S ome of the b attery cartridges and chargers listed ab ov e may not b e av ailab le depending on y our region of residence.
WARNING:
Only use the battery cartridges and chargers listed above.
U se of any other b attery cartridges
and chargers may cause injury and/or fire.
Intended use
T he tool is intended for impact drilling in b rick, b rickw ork
and masonry . It is also suitab le for screw driv ing and
drilling w ithout impact in w ood, metal, ceramic and
plastic.
Noise
T he ty pical A- w eighted noise lev el determined accord-
ing to E N6 2 8 4 1 - 2 - 1 :
S ound pressure lev el (L
pA
) : 8 5 dB(A)
S ound pow er lev el (L
WA
) : 9 6 dB (A)
U ncertainty (K ) : 3 dB(A)
NOTE: T he declared noise emission v alue(s) has
b een measured in accordance w ith a standard test
method and may b e used for comparing one tool w ith
another.
NOTE: T he declared noise emission v alue(s)
may also b e used in a preliminary assessment of
ex posure.
WARNING:
W ear ear protection.
WARNING:
The noise emission during actual
use of the pow er tool can differ from the declared
value( s) depending on the w ays in w hich the
tool is used especially w hat kind of w orkpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use ( taking account of all parts of the operating
cycle such as the times w hen the tool is sw itched
off and w hen it is running idle in addition to the
trigger time) .
Vibration
T he v ib ration total v alue (tri- ax ial v ector sum) deter-
mined according to E N6 2 8 4 1 - 2 - 1 :
Work mode: impact drilling into concrete
Vib ration emission (a
h,ID
) : 6 .0 m/ s
2
U ncertainty (K ) : 1 .5 m/ s
2
Work mode: drilling into metal
Vib ration emission (a
h,D
) : 2 .5 m/ s
2
or less
U ncertainty (K ) : 1 .5 m/ s
2