Makita GS5000, Instruction Manuals

Page: 6 / 12

6 ENGLISH
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
1
2
A
B
C
1. Switch trigger 2. Lock lever
CAUTION:
• Before plugging in the tool, always check to see
the switch trigger actuates properly and returns
to the "OFF" position when released.
For tool with the lock-on switch
CAUTION:
• Switch can be locked in "ON" position for ease
of operator comfort during extended use. Apply
caution when locking tool in "ON" position and
maintain irm grasp on tool.
To start the tool, simply pull the switch trigger (in the B
direction). Release the switch trigger to stop. For con-
tinuous operation, pull the switch trigger (in the B direc-
tion) and then push in the lock lever (in the A direction).
To stop the tool from the locked position, pull the switch
trigger fully (in the B direction), then release it.
For tool with the lock-off switch
To prevent the switch trigger from accidentally pulled, a
lock lever is provided. To start the tool, push in the lock
lever (in the A direction) and then pull the switch trigger
(in the B direction). Release the switch trigger to stop.
For tool with the lock on and lock-off
switch
To prevent the switch trigger from accidentally pulled, a
lock lever is provided.
To start the tool, push in the lock lever (in the A direc-
tion) and then pull the switch trigger (in the B direction).
Release the switch trigger to stop.
For continuous operation, push in the lock lever (in the
A direction), pull the switch trigger (in the B direction)
and then pull the lock lever (in the C direction).
To stop the tool from the locked position, pull the switch
trigger fully (in the B direction), then release it.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
1
2
4
5
3
1. Hex wrench 2. Hex bolt 3. Hex lock nut 4. Tighten
5. Loosen
CAUTION:
• When the wheel cover is positioned for more
safety, tighten the two hex bolts by the strength
more than 10 N•m to secure the wheel cover
properly.
Installing or removing grinding
wheel
Optional accessory
CAUTION:
• Before installing grinding wheel, always check
that a blotter part does not have any abnormali-
ties such as chips or cracks.
• Overtightening the wheel can cause breakage.
Failure to tighten suficiently will cause lutter.
Tighten the outer lange properly.
• Always use the grinding wheel with the blotter
that has larger diameter than the lock nut or the
outer lange and the inner lange.