Makita GN420C, Instruction Manual

Page: 7 / 76

7
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
END107-5
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
... Read instruction manual.
............. Container under pressure, keep away
from temperatures over 50°C (for ex. sun
radiation). Keep container in a well
ventilated place.
............. Use only outside or well ventilated
rooms. Do not breathe gas.
............. Do not use near flames or sprays on
heated surfaces. In use, may form
flammable/explosive vapour-air mixture.
............. Do not damage, puncture or burn even
after use.
..... Wear safety glasses.
............. Keep fingers away from trigger when not
driving fasteners to avoid accidental
firing.
............. Use only in ventilated area to avoid
nausea and unconsciousness. Never use
tool in combustible atmospheres. The
tool exhaust may ignite flammable
materials.
............. Do not use on scaffoldings, ladders.
............. Warning: hot surface!
Do not touch around this symbol.
Touching the surface may cause burns or
injuries.
.......... Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
ENE072-1
The tool is intended for securing a thin steel plate to the
concrete.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
1. Safety glasses
2. Face shield
3. Fuel cover
4. Trigger
5. Magazine
6. Pusher lever
7. Pusher button
8. Contact element
9. Exhaust vent
10. Lamp
11. Indicating lamp
12. Battery cartridge
13. Button
14. Lamp button
15. Metering valve
16. Cap
17. Jet nozzle
18. Adjuster 19. Hook
20. Nail stopper
21. Bolt
22. Thin steel plate
23. Penetration amount into concrete
24. Under driver guide
25. Filter cover
26. Filter
Model GN420C
Nail capacity 20 nails (2 strips) 40 nails (4 strips)
Dimensions (L X W X H) 315 mm X 108 mm X 390 mm 430 mm X 108 mm X 390 mm
Net weight 3.6 kg 3.8 kg
Nail length X Shank diameter Nail L: 15 mm - 40 mm, d: 2.6 mm - 3.1 mm
Rated voltage D.C. 7.2 V
Cd
Ni-MH
Li-ion