Makita DWD181ZJ Instruction Manual Download

Page: 2 / 67

Contents

Specifications

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3

Applicable battery cartridge

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

Continuous operating time per one time of charge (*)

- - - - - - - - - - - - - - 4

Symbols

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

Intended Use

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

Laser Beam Related Safety Standards

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

Safety Declaration

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

Radio Standards

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

Déclaration sur la sécurité

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9

Normes radioélectriques

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9

Safety Warnings

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12

Important Safety Instructions for Battery Cartridge

- - - - - - - - - - - - - - - - - - 18

Tips for maintaining maximum battery life

- - - - - - - - - - - - - - - - - - - - - - - - 19

Names of Parts

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20

Names of exterior parts

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20

Names of operation buttons

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21

Standard Accessories

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21

Optional Accessories

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22

Battery

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23

Battery

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23

For long battery life

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23

Installing or Removing Battery Cartridge

- - - - - - - - - - - - - - - - - - - - - - - - - - 24

Using the Wall Scanner

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25

Operation flow

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25

Startup

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26

Selecting a scan mode

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27

Selecting a scene

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28

Scanning

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 30

Scan result display

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 32

Marking the locations of buried objects

- - - - - - - - - - - - - - - - - - - - - - - - - - 34

Shutdown

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 35

Settings

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 36

Operation

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 39

Searching for iron bars in concrete

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 39

Searching for wiring resin pipes in concrete

- - - - - - - - - - - - - - - - - - - - - - 41

Searching for a pillar behind a gypsum board

- - - - - - - - - - - - - - - - - - - - 46

Searching for iron bars in a block fence

- - - - - - - - - - - - - - - - - - - - - - - - - - 48

To scan better

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 51

Protection System

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 55

Protective functions for the scanner and the battery

- - - - - - - - - - - - - - - 55

Maintenance

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 57

Care of the product

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 57

Summary of Contents for DWD181ZJ




































































Search results

Summary of Contents for DWD181ZJ

Reviews:

Related manuals for DWD181ZJ

Brands by name

Popular brands

Makita DWD181ZJ, Instruction Manual

Search results

Summary of Contents for DWD181ZJ

Reviews:

Related manuals for DWD181ZJ

Brands by name

Popular brands