11
ENGLISH
6 .
Do not expose a battery pack or tool to re or
excessive temperature.
Exposure to fire or tem
-
perature abov e 1 30 ° C may c ause ex plosion.
7.
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range speci ed in the instruc
-
tions.
C h arging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
Important safety instructions for
battery cartridge
1 .
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery char-
ger, (2) battery, and (3) product using battery.
2.
Do not disassemble battery cartridge.
3.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4 .
If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5 .
Do not short the battery cartridge:
( 1 )
Do not touch the terminals with any con-
ductive material.
( 2)
Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
( 3)
Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
o , overheating, possible burns and even a
breakdown.
6 .
Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 ° C (122 ° F) .
7.
Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
out. The battery cartridge can explode in a re.
8 .
Be careful not to drop or strike battery.
9 .
Do not use a damaged battery.
1 0.
The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
F or c ommerc ial transports e.g. by th ird parties,
f orw ard ing agents, spec ial req uirement on pac k-
aging and labeling must be observ ed .
F or preparation of th e item being sh ipped , c onsult-
ing an ex pert f or h az ard ous material is req uired .
P lease also observ e possibly more d etailed
national regulations.
T ape or mask of f open c ontac ts and pac k up th e
battery in suc h a manner th at it c annot mov e
around in th e pac kaging.
1 1 .
Follow your local regulations relating to dis-
posal of battery.
1 2.
Use the batteries only with the products
speci ed by Makita.
I nstalling th e batteries to
non-compliant products may result in a fire, exces
-
siv e h eat, ex plosion, or leak of elec troly te.
SAVE THESE INSTRUCTIONS.
CAUTION:
Only use genuine Makita batteries.
U se of non-genuine Makita batteries, or batteries th at
h av e been altered , may result in th e battery bursting
causing fires, personal injury and damage. It will
also v oid th e Makita w arranty f or th e Makita tool and
c h arger.
Tips for maintaining maximum
battery life
1 .
Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3.
Charge the battery cartridge with room tem-
perature at 10 ° C - 40 ° C (50 ° F - 104 ° F) . Let
a hot battery cartridge cool down before
charging it.
4 .
Charge the battery cartridge if you do not use
it for a long period (more than six months) .
Important safety instructions for
wireless unit
1 .
Do not disassemble or tamper with the cleaner.
The wireless unit in the cleaner cannot be
removed.
2.
Do not operate the wireless activation function
in places where medical instruments, heart
pace makers, or automated devices, such as
automatic doors and re alarms, are nearby.
3.
Do not use the cleaner in places where the
temperature exceeds 50° C (122° F) .
4 .
The wireless unit is an accurate instrument. Be
careful not to drop or strike the cleaner.
5 .
Do not leave the cleaner in a place where
static electricity or electrical noise could be
generated.
PARTS DESCRIPTION
Model DVC152L
(Cloth filter (for dry and wet dust) model)
Fig.1:
1.
T ank c ov er
2.
F loat
3.
F loat c age
4.
C loth
filter
5.
T ank
Model DVC153L, DVC154L
(Powder filter (for dry dust) model)
Fig.2:
1.
T ank c ov er
2.
Powder filter (HEPA)
3.
D amper
4.
Prefilter
5.
T ank
Summary of Contents for DVC152L
