Makita DUR365UPM2, Instruction Manual

Page: 16 / 112

16
TROUBLE SHOOTING
Before asking for repairs, conduct your own inspection
first. If you find a problem that is not explained in the
manual, do not attempt to dismantle the tool. Instead,
ask Makita Authorized Service Centers, always using
Makita replacement parts for repairs.
Tighten the nut properly as described
in this manual.
Recharge the battery cartridge. If recharging
is not effective, replace battery cartridge.
Recharge the battery cartridge. If recharging
is not effective, replace battery cartridge.
Cutter blade fastening nut is loose.
Cutter blade is fastened improperly.
The cutter blade is bent,
cracked or worn.
Malfunction status
Motor does not run.
Cause
Battery cartridges are not installed.
Battery problem (under voltage)
Rotation is in reverse.
O verheating.
Battery power is dropping.
Electric or electronic malfunction.
Action
Install the battery cartridges.
Remove the foreign object.
Motor stops running after a little use.
It does not reach maximum RPM.
Cutting tool does not rotate:
stop the machine immediately!
Abnormal vibration:
stop the machine immediately!
Cutting tool and motor cannot stop:
Remove the battery immediately!
Cutter blade fastening nut is loose.
Tighten the nut properly as described
in this manual.
The cutter blade is bent. Replace the cutter blade.
Replace the cutter blade.
The drive system does not work
correctly.
Battery's charge level is low.
Battery is installed improperly.
The drive system does not work
correctly.
Foreign object such as a branch is
jammed between the guard and
the nylon cutting head.
The drive system does not work
correctly.
O ne end of the nylon cord has
been broken.
The drive system does not work
correctly.
Recharge the battery cartridge. If recharging
is not effective, replace battery cartridge.
Ask your local authorized service center for
repair.
Ask your local authorized service center for
repair.
Change the direction of ratation with the
reversing switch.
Stop using of tool to allow it to cool down.
Install the battery cartridge as described in
this manual.
Ask your local authorized service center for
repair.
Ask your local authorized service center for
repair.
Bump the nylon cutting head against the
ground while it is rotating to cause the cord
to feed.
Remove the battery cartridge and ask your
local authorized service center for repair.
014837