![background image](http://html1.mh-extra.com/html/makita/dua301pt2/dua301pt2_instruction-manual_3980581013.webp)
13 ENGLISH
Vibration
Left handle (Front grip)
Right handle (Rear grip)
Applicable standard
ah (m/s
2
)
Uncertainty K (m/s
2
)
ah (m/s
2
)
Uncertainty K (m/s
2
)
2.5 or less
1.5
2.8
1.5
ISO22867(ISO11680-1)
NOTE:
The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE:
The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool.
Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless Telescopic Pole Saw
Safety Warnings
General precautions
1.
Before starting the tool, read this instruction
manual to become familiar with the handling of
the tool.
2.
Do not lend the tool to a person with insuffi
-
cient experience or knowledge regarding han-
dling of the tool.
3.
When lending the tool, always attach this
instruction manual.
4.
Do not allow children or young persons under
18 years old to use the tool. Keep them away
from the tool.
5.
Handle the tool with the utmost care and
attention.
6.
Never use the tool after consuming alcohol or
drugs, or if feeling tired or ill.
7.
Never attempt to modify the tool.
8.
Do not use the tool in bad weather conditions,
especially when there is a risk of lightning.
This decreases the risk of being struck by
lightning.
9.
National regulations may restrict of the use of
the tool. Follow the regulations about handling
of the tool in your country.
Personal protective equipment
1.
Wear safety helmet, protective goggles and
protective gloves to protect yourself from
flying debris or falling objects.
2.
Wear ear protection such as ear muffs to pre
-
vent hearing loss.
3.
Wear proper clothing and shoes for safe
operation, such as a work overall and sturdy,
non-slip shoes. Do not wear loose clothing or
jewelry.
Loose clothes, jewelry or long hair can be
caught in moving parts.
4.
When handling the saw chain or adjusting the
chain tension, wear protective gloves.
Saw
chain can cut bare hands severely.
Work area safety
1.
Keep the tool at least 15 m away from electric
lines and communication cables (including
any branches contacting them). Touching or
approaching high-voltage lines with the tool
can result in death or serious injury. Watch
power lines and electrical fences around the
work area before starting operation.
2.
Operate the tool under good visibility and day-
light conditions only. Do not operate the tool in
darkness or fog.
3.
During operation, never stand on an unstable
or slippery surface or a steep slope. During
the cold season, beware of ice and snow and
always ensure secure footing.
4.
During operation, keep bystanders or animals
at least 15 m away from the tool. Stop the tool
as soon as someone approaches.
5.
When working with two or more people, keep a
distance of at least 15 m or more between each
other, and put a supervisor.
6.
Before operation, examine the work area for
wire fences, walls, or other solid objects.
They
can damage the saw chain.
Summary of Contents for DUA301PT2
