![background image](http://html1.mh-extra.com/html/makita/dtm41/dtm41_technical-information_4128735009.webp)
P
9
/ 1
2
R
epair
ASSEMBLING
Baffle
plate side
Note in Assembling
:
Switch lever is not reversible. Assemble it to bring the lock claw
to the opposite side of Baffle plate as per the left shown.
Motor housing
Assemble Switch lever and Switch knob as drawn in
Fig. 14
.
3. Pressing Switch lever against Motor housing, insert the locking claws of Switch knob into the locking hole of
Switch lever.
Switch lever
Switch knob
locking hole
Motor housing
locking claw
Switch knob’s locking claws,
locked in place
Baffle
plate side
Motor housing
Fig. 14
2. Bending the rear end of Switch lever, slide Switch lever
into Motor housing as drawn below.
Compression spring 5
1. Be sure that Compression spring 5 is
mounted on the back of Switch lever.
Switch lever
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Switch Lever (cont.)