![background image](http://html1.mh-extra.com/html/makita/dtm41/dtm41_technical-information_4128735010.webp)
P 1
0
/ 1
2
R
epair
2. Assemble Controller to Motor housing while facing Sponge sheet side
toward Motor housing as shown below.
1. Stick Sponge sheet to Controller on the specified space by the side of Yellow lead wire as shown below.
Note
: • Be careful not to stick the sheet on the other side and the wide side.
• Put the sheet along the bank of Controller so that there is not clearance.
Stick Sponge sheet to Controller as drawn in
Fig. 15
.
Fig. 15
ASSEMBLING
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Controller
Controller
Sponge sheet
Yellow Lead wire
Sponge sheet
Sponge sheet
Controller
Motor housing
Housing cover