6 ENGLISH
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Noise
The
typical
A-weighted noise
level
determined according to
EN60745:
Sound pressure level (L
pA
)
:
98
dB(A)
Sound power level (L
WA
)
:
109
dB
(A) Uncertainty
(K)
:
3
dB(A)
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to
EN60745: Work
mode:
impact
tightening of
fasteners of
the
maxi-
mum capacity of the tool
EC Declaration of Conformity
Vibration emission (a
h
) :
12.5
m/s
2
Uncertainty
(K) :
1.5
m/s
2
For European countries only
The
EC
declaration of
conformity is
included
as
Annex
A
to
this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings and
all instructions.
Failure to follow the warnings and
instructions
may
result
in
electric
shock,
fire
and/or
serious
injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless impact driver safety
warnings
1.
Hold power tool by insulated gripping
surfaces, when performing an operation where
NOTE:
The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared vibration emission value may
also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an
estimation of exposure in the actual conditions of use
(taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it
is running idle in addition to the trigger time).
