10 ENGLISH
To
turn
on
A
mode,
press
the
button
on the
panel. Pull the
switch
trigger
to
start
driving
in
A
mode.
►
Fig.10:
1.
Changed in
five
steps
2.
Max
3.
Hard
4.
Medium
5.
Soft
6.
T mode
7.
Button
You
can
change
the
impact
force
in
five
steps:
max,hard, medium, soft, and
T mode.
This allows a tightening suitable to the work.
Every
time
the
button
is
pressed, the number of blows
changes
in
five
steps.
“T”
is
a
special
mode
for
fastening self
drilling
screws.
In this mode, the tool starts to drive a
screw with faster rotation, which is suited for drilling
with the self-drillingscrew tip. Once the tool starts to
tighten the screw, it impacts in medium force grade.
For approximately one minute after releasing the
switch trigger, the impact force can be changed.
►
Fig.9:
1.
Button
2.
Button
To
release
A
mode,
press
the
button
(not the button
).
Changing the impact force
