![background image](http://html1.mh-extra.com/html/makita/dhr165/dhr165_technical-information_4065069009.webp)
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Gear section
DISASSEMBLING
1R022
Set 1R022 and 1R306 to
Arbor press in advance.
Set Tool holder section
on Arbor press.
Press down Flat washer 25
with 1R022 to reserve the
space for inserting 1R004
to Retaining ring WR-25.
While pressing down Flat washer 25 with 1R022,
remove Retaining ring WR-25 with 1R212.
Washer 25, Compression spring 25 and Spur
gear 46 are removed.
1R306
1R022
Tool holder section
Flat washer 25
1R022 for pressing
down Flat washer 25
Flat washer 25
Compression spring 25
Spur gear 46
Spur gear 46 on Tool holder
Note
: Ball bearings 606ZZ on the both ends of Spur gear 10 are still
left in Gear housing complete and Inner housing complete.
Spur gear 10
and
Swash bearing section
(1) Disassemble Tool holder section, Joint plate from Piston cylinder. (
Fig. 6 in page 6
)
(2) Remove Spur gear 10 and Swash bearing section from Piston cylinder and Inner housing complete. (
Fig. 7 in page 7
)
(3) Spur gear 46 can be removed as
the upper drawing in
Fig. 10
.
Meanwhile, Spur gear 10 and Helical gear 22 can be removed as
the lower drawing in
Fig. 10
.
Fig. 10
1R022
1R022
1R022
Hold Helical gear 22 with 1R022, and press down the shaft portion.
Helical gear 22, Swash bearing 9, clutch cam are removed from Spur gear 10.
1R022
Helical gear 22
Clutch cam
Swash bearing 9
Spur gear 10
P 9/ 17
R
epair
1R022
1R022
Flat washer 25
1R212
Retaining
ring WR-25
Helical gear 22