[3] DISASSEMBLY/ASSEMBLY
[3]-2. Armature (cont.)
Fig. 7
Fig. 8
DISASSEMBLING
Note
: Separating Spur gear 10 with Swash bearing section
from Piston cylinder is impossible when Piston cylinder
stays in the furthest position from Armature side as
drawn below.
(4) Disassemble Spur gear 10 and Swash bearing section as drawn in
Fig. 7
.
(5) Armature can be removed from Inner housing complete as drawn in
Fig. 8
.
1. Move Piston cylinder to the closest position
to Armature side by turning Armature carefully.
Note
: Do not scratch and stain Armature.
Put Inner housing complete on 60 mm width U-grooved table of Arbor press,
and then press down Armature shaft with 1R225.
Spur gear 10
Swash bearing section
Armature
Armature
Pole of Swash bearing
Pole
Piston cylinder
Piston cylinder
3. Remove Piston cylinder from
Inner housing complete.
60 mm
Armature
Inner cylindrical portion of
Inner housing
complete
Inner cylindrical
portion of Inner
housing complete
2. Pull out Spur gear 10 and Swash bearing section from Piston cylinder
in direction of the black arrows.
1R225
Armature
shaft
Inner housing
complete
Inner housing
complete
1R225
Arbor press
Armature
Inner housing
complete
P 7/ 17
R
epair
