[3] DISASSEMBLY/ASSEMBLY
[3]-5. Impact bolt (cont.)
[3]-6. Assembling of F/R change lever
ASSEMBLING
Assemble Impact bolt as drawn in
Fig. 20
.
Fig. 20
Fig. 21
1. Mount X ring 13
to Ring 11.
2. Mount X ring 13 and Ring 11
to Impact bolt.
3. Put X ring 13, Ring 11 and Impact bolt
into Tool holder.
4. Mount Ring spring 22 by pressing it
with Piston cylinder into Tool holder.
5. Put Striker into Tool holder while facing
the cylindrical hole to Impact bolt side.
Note
: Do not forget to assemble O ring 14
to Striker in advance.
Set Ring spring 22 in place so that the gap
of Ring spring 22 does not come to
the side holes of Tool holder complete.
* Piston cylinder as a repairing tool
(Refer to
[1] NECESSARY REPAIRING TOOLS
of page 3.
)
X ring 13
Ring 11
Impact bolt
Striker
Cylindrical hole
Ring spring 22
side holes of Tool holder complete
Tool holder
complete
Pronged portion
Assemble F/R change lever to Switch as drawn below.
Pin portion
F/R change lever
O ring 14
P 15/ 17
R
epair