Makita CS002G, Instruction Manual

Page: 6 / 102

6 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: CS002G
B l a d e d i a m e t e r 185 m m
M a x . C u t t i n g d e p t h 67 m m
N o l o a d s p e e d ( R P M ) 3 , 500 m i n
-1
R a t e d v o l t a g e D.C . 3 6 V - 4 0 V m a x
O v e r a l l l e n g t h 3 50 m m
N e t w e i g h t 4 .2 - 5.4 k g
• Due to our continuing program of research and development, the specifications herein are subject to change
w i t h o u t n o t i c e .
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi -
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020 / BL4025* / BL4040* / BL4050F* / BL4080F
* : Recommended battery
C h a r g e r DC40RA / DC40RB / DC40RC
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
r e s i d e n c e .
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
T h e t o o l i s i n t e n d e d f o r c u t t i n g i n m i l d s t e e l .
Noise
The typical A-weighted noise level determined accord -
ing to EN62841-2-5:
S o u n d p r e s s u r e l e v e l ( L
pA
) : 102 dB (A)
S o u n d p o w e r l e v e l ( L
WA
) : 113 dB (A)
Uncertainty (K) : 3 dB (A)
NOTE: The declared noise emission value(s) has been
m e a s u r e d i n a c c o r d a n c e w i t h a s t a n d a r d t e s t m e t h o d
and may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING:
W ear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter -
mined according to EN62841-2-5:
Work mode: cutting metal
Vibration emission (a
h , M
) : 2.5 m/s
2
o r l e s s
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration total value(s) has been
m e a s u r e d i n a c c o r d a n c e w i t h a s t a n d a r d t e s t m e t h o d
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared val -
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
t o t h i s i n s t r u c t i o n m a n u a l .