P 4/ 9
1) Remove Housing R. (Refer to previous page.)
2) Remove Compression spring 4. (
Fig. 8
)
3) Remove Fix plate and 4x18 Tapping screws (2pcs.) (
Fig. 9
)
4) Remove Safety lever guide and M4x6 Hex. socket head bolts (2pcs.), then loosen
M5x18 Hex. socket head screws (2pcs.) with Hex wrench 5 and 1R230. (
Fig. 10
)
5) Remove Magazine section.
6) Remove Guide plate, Hammer driving section and Safety cover. (
Fig. 11
)
7) Remove Slide plate from Housing L. (
Fig. 12
)
8) Remove Hammer by pulling out Pin 4 from Driver lock. (
Fig. 13
)
9) While holding Holder portion by gloved hand as illustrated in
Fig. 14
(or clamping in vise), loosen Guide bolt by
hooking the flats and turning counterclockwise by monkey wrenches. When Guide bolt is separated,
Compression springs is slightly released.
10) Cushion etc. held in the gloved hand are removed as illustrated in
Fig. 17
of next page.
[4] DISASSEMBLY/ ASSEMBLY
[4]-3. Hammer, Cushion
R
epair
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 8
4x18 Tapping screw (2pcs.)
Fix plate
Compression
spring 4
Safety lever guide
Magazine section
Slide plate
Hammer driving
section
Guide plate
Safety lever
M5x18 Hex. socket
head bolt (2pcs.)
M4x6 Hex. socket
head bolt (2pcs.)
Pin 4
Driver lock
Hammer
flats of
head portion
of Guide bolt
DISASSEMBLING
